Download E-Sys 3.28.1+Psdzdata Lite V3.61.1 for BMW F10 Coding

Here you can free download E-Sys 3.28.1 and Psdzdata Lite V3.61.1 for BMW F Series Coding includes BMW F10! Tool you need: BMW ENET Cable or BMW ICOM A2.

 

Free download BMW E-SYS 3.28.1+ E-SYS Launcher Premium 2.7.0+ Psdzdata V3.61.1 Lite

https://mega.nz/#F!tc00gSIb!QSJatG3d3e4JVaDMt2aIhw

No pass! Enjoy!

Note:

  1. You must uninstall the existing E-SYS version before installingnew E-SYS 3.28.1. After installing tested it with Launcher 2.7.0 and it works.
  2. E-SYS Launcher Premium V2.7.0 Build 132(require NET Framework 4.5.2 or later)
  3. E-SYS Launcher Premium V2.7.0info

Added cheat code selection

Change Code Default Values button name to DO NOT USE!!! (VERWENDEN SIE KEINE!!!)

Windows XP support again

Minor bug fixes

 

BMW F Series F10 Coding Guide

Preparation:

  1. Hardware

A laptop PC with Windows OS: It doesn`t matter what OS version you already have installed. The software will work with any windows version.

A BMW ENET Coding Cable: Cheapest option cost only $16.99. All F series cars need this cable to do coding.

enet-ethernet-to-obd-interface-cable-1

Or BMW ICOM A2: Allow you to diagnose and program more than just do coding.

BMW ICOM A2 full package without software $389

BMW ICOM A2 full package with latest ISTA 4.04.12 HDD $459

bmw-icom-a2-b-c-diagnostic-programming-tool-with-software-new-2

  1. Software

To code BMW F10 you need both E-Sys and psdzdata. So we make you this blog!

What does this mean in simple terms?

You need a piece of software that is used to make changes to the values on your car and that software also needs data files in order to do so.

 

Software Installation:

How to install E-Sys? (Set E-Sys 3.26.1 as example)

Extract E-Sys using Winrar. Right click it and click “extract here”.

Run E-Sys_Setup_3_26_1_b42487.exe

Select language, click “Next” then “I accept the agreement” then “Next”.

Click “Browse” to choose where to install E-Sys. The default location is C:\EC-Apps\ESG\E-Sys.

how-install-bmw-e-sys-3-28-1-psdzdata-guide-3

Set the data path for E-Sys, the default is C:\Data.

how-install-bmw-e-sys-3-28-1-psdzdata-guide-4

Click next until the installation begins.

how-install-bmw-e-sys-3-28-1-psdzdata-guide-5

Click “Finish” to complete the basic installation procedure for E-sys.

Then you need to make it work.

You will see two folders, one is a “Patch” the other is “Token Generator”.

how-install-bmw-e-sys-3-28-1-psdzdata-guide-6

The patch folder contains 2 files

how-install-bmw-e-sys-3-28-1-psdzdata-guide-7

Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)

Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)

Use the Token Software, enter a username as you like and password.

 

How to install psdzdata?

This is an important and final step of the installation process. The E-Sys installation doesn’t contain any data so you must copy the data into the right folder.

It’s recommended to use the Psdzdata “Lite” version because it has all the Firmware data removed so it saves a lot of space!

Extract Psdzdata using Winrar. Right click it and click “extract here”.

After that go to C:\Data and erase the existing “Psdzdata” folder and copy this extracted new one in the same location.

  1. You can use E-Sys now!

Save

(Visited 2,128 times, 5 visits today)