OBDSTAR DP Plus is really nice tool to do 2015 Baojun 730 ECM reset and programming, it runs fast, easy to operate by following the on-screen instructions.
FYI, the green OBDSTAR DP Plus = orange OBDSTAR DP Plus in the functions and coverage.
The difference is Orange is sold by online dealer, the green one is sold by the factory.
Use the key to turn on ignition.
Plug obdstar DP Plus into the OBD2 port of 2015 Baojun 730, choose “Immobilizer” then “SGMW /BAOJUN”.
Switch ignition on.
Read out VIN, input pincode.
there are 2 keys.
Back to choose “ECM reset”.
Read the on-screen instructions one by one.
ECM reset successfully! Please put the key to the OFF file, at least 45 seconds later, to remove the engine control module (ECM) II.
Back to choose “Program Modules”.
IMMO module has been locked.
ECM learning PIN code success!
ECM Learning SK code success!
ECM information has been written!
The engine module and IMMO have been programmed successfully.
2 keys has been configured.
It can also configure the keys:2
Insert the key to program and turn on the igniton.
The key has been programmed.
Lock ECM client mode successfully.
Completed, please hit the key into the OFF file 20 seconds after the restart.
Back to tap “Key No.”, there are 2 keys now.
Test if the key can start the car.
UOBDII Official Blog All rights reserved 2015 Baojun 730 ECM reset and programming with obdstar DP Plus